Changing Utility Suppliers Is Easier Than You Think

If you’re anything like me, you probably associate electricity and gas companies as the people who make you stay in for half a day so that they can come and read your meter or make some important engineering change to your equipment. They can never actually commit to a time – and even when you eventually pin them down to coming in the morning or the afternoon, they don’t always show when they say they will.

My dealings with utility suppleirs have, until recently, been nothing but one big hassle. That’s why, even although I suspected that I could save money by switching suppliers, I was somewhat reticent. I really thought that it would be a lot of fuss and involve me taking time of work while old meters were ripped out and new ones installed.

Turns out I couldn’t have been any more wrong. After a little bit of online research, the hardest part of which was getting all of my bills together, I chose the supplier that offered the best deal and signed up on the interweb. After that, everything was switched over remotely.

There was no need for any engineers to visit my house, and I didn’t, wonder of wonders, have to take time off work and sit in (quietly fuming). It was all done on auto-pilot as far as I was concerned. The only thing that I had to do was to take a meter reading for my electricity and gas and phone it in (I could have done it online too if I had wanted), which isn’t too much of a hassle really. It’s something that I normally had to do every 3 months or so anyway for my previous supplier.

I got a good deal on my new utility supplies. I got a really good multi-service discount due to the fact that I shifted my phone, internet, gas and electricity to one single supplier (Telecom Plus). Apart from the already good prices, I got a further 10% off my gas and electricity after 12 months – which is pretty good I think you’ll agree. Having everything consolidated on a single monthly utility bill was also very convenient I must admit.

The only small regret that I have is the fact that I didn’t do it earlier. I could have saved a lot of money a lot sooner. Anyway, no use crying over spilled milk as they say. You can have a look at the options open to you here if you like:


Can Technology Actually Cut Your Energy Bill Each Month?

reduce energy bills piggy bank imageFor most families, the monthly utility bill will represent one of the largest financial outgoings on a regular basis. As a result, most families would be very grateful for suggestions as to how to cut the size of their monthly bill.

Thankfully, there are plenty of different ways by which this can be achieved. You might be surprised to learn that modern technology offers a number of different ways for reducing your energy usage. Most of the potential energy saving solutions are simple, require little or no up front investment and are extremely effective. Most of them will lead to an almost immediate reduction in the size of your monthly bill.

The simple expedient of turning off electrical appliances that are not in use is a common sense way to save money on your electricity bill each month. The trouble is that common sense can be a rare commodity at times – and some of our gadgets are almost never switched off. Instead of being properly turned off, a lot of modern gadgets enter “standby mode” instead. In addition to devices on standby, charging devices – such as those used for cell phones, notebook computers and other portable devices – also draw power when they are left plugged in and not charging anything.

As much as 10% of a typical family home’s electricity can be used up in supplying devices which are not actually being used but are sitting “on standby”. You can save money by turning these devices off properly. These days, you can even get special power adapters which detect when a device is in standby mode and then cut off the supply of electricity to it.

You could reduce your monthly utility bill by quite a lot just by fitting these adapters throughout your family home. You might find that it also prolongs the lifespan of some of your electrical devices.

Installing energy saving light bulbs throughout your house is another good way to make use of modern technology reduce your energy use and save money. The conventional incandescent filament bulbs that most of us have been using for years, are a good example of a device which generates more heat than light. A mere 10% of the energy supplied goes towards producing light. The other 90% is wasted in the form of heat.

Modern energy efficient light bulbs use less than a quarter of the energy of traditional light bulbs in order to generate the same level of illumination. They also have a much longer life – so as well as saving you money, you won’t need to get your step ladder out to change light bulbs anything like as often.

Another possible way of making the most of modern technology to cut your bills down is to use cleaning agents and detergents specifically designed to operate at low temperatures. You’ll be able to run your washing machine and dishwasher on lower than normal temperature settings.

The washing machine and dishwasher are two of the most energy hungry appliances in the typical family home. Operating them at a lower temperature – say 30 degrees – could reduce the energy used by up to 40%, and that could have a very positive impact on your energy bill each month.

Visit this website to get more energy saving tips.

Changing To Energy Efficient Light Bulbs

energy efficient light bulbsThere are plenty of different ways to save money on you electricity bill each month. One quick and easy way is simply to swap your old fashioned light bulbs for energy efficient ones.

Most people think of Compact Fluorescent (CFL) bulbs as energy saving light bulbs. In order to produce the same amount of light as an old filament bulb, CFL bulbs use about one quarter of the energy. You can get the same light from a 13W CFL bulb that you would get from a 60W bulb.

You can save 75% of your lighting costs every month. That soon adds up – especially if you change all the bulbs in your house. CFL light bulbs do cost a little more than traditional light bulbs. However, they last somewhere between 8 and 10 times as long. Roughly speaking, you should go for around 10,000 hours before you have to replace a CFL bulb.

Light Emitting Diode (LED) bulbs are also becoming more widely available at reasonable prices. These use about 10% of the energy that you would require for the same light level from a filament bulb. The lifespan of these bulbs is estimated to be around about 50,000 hours – sometimes more. Apart from saving you a lot of money, they are absolutely ideal for lights that are in awkward to reach places – such as in lofts for example.

The Easiest Way To Save Money On Your Energy Bills

Switch Suppliers And Save Money

There are any number of different ways to save money on your utility bill each month. Some require a little investment, some have short payback times, others take longer.

One of the quickest and easiest ways to save money on your bills, and one which requires no investment on your part, is simply to switch your supplier.

In all probability, you will be pleasantly surprised at just how easy and painless this is. Do a little research online and select the best supplier for you. At the moment, there are plenty of utility companies which are offering competitive rates. The deregulation of the market has been good for consumers.

You will find plenty of competitive prices available – and there are numerous discounts for taking more than one service. As a minimum, you should expect to get a duel fuel discount. However, some companies offer more than two services of course – which means that you should be able to get an even better deal.

Personally, I signed up with the Utility Warehouse Discount Club. The nice thing about the UWDC is the fact that you can get your phone, your mobile, your electricity and gas and your internet connection all on one bill. The discount for taking four services is very good – and it’s also really handy to consolidate everything onto one single bill.

You can also save money depending upon how you choose to pay, when you choose to pay (once a month, once a quarter etc.) and whether or not you’re prepared to have your bill sent to you by e-mail rather than having a paper one sent to you through the post.

There are any number of different companies vying for your business – and any number of different permutations of the services on offer. There’s certain to be something that will work for you.

Switching Suppliers Is Easier Than You Think

It’s not difficult to change your utility supplier these days. Once you’ve done a little online research and decided what the best deal for you is, you can usually change supplier online. You’ll need copies of your old bills plus your bank details so that you can set up payments. It shouldn’t take more than ten or fifteen minutes to make the switch.

When you do switch online, that is usually all that’s required. You may need to take a meter reading so that your old supplier can send you a final bill and your new supplier can start to record the level of usage going forward. In all probability, no engineer will need to visit your house – most of these changes are made remotely these days.

Apart from gathering your bills together and doing a little online research, there’s very little effort required on your part. However, the savings could, depending upon your circumstances, be substantial – so it might be worth your while to look into changing utility suppliers sooner rather than later.